How to Replace Honda Key Fob Batteries in Fresno, CA

Every battery is bound to die eventually, including the Honda key fob battery. Luckily, the Honda key fob battery replacement is simple and the team at Honda North can walk you through it! So how do you open the Honda key fob and change its battery? Keep on reading our guide, and you will find it handy for several occasions. The next time your fob battery dies on Fresno roads, you will know what to do to change the Honda key fob battery!

Honda Key Battery Type

While it is a bummer when it’s time for a Honda key fob battery replacement, it is actually easy to find a new one since it can be found in many stores in the Madera area. Usually, the Honda key fob battery is flat circular 3-volt. To save yourself time and trouble, you should work with our Honda parts center in Clovis to find the right Honda key fob battery replacement for your car. You can also save some money with our parts specials!

How to Open the Honda Key Fob?

Before you learn how to change the Honda key battery, you need to learn how to open the Honda key fob first. First, find the button that releases the metal key inside the fob. Then, slide the button open and pull the key out. Afterward, place the edge of the key into the slot at the top of the key fob carefully. When you wedge the key and twist gently, the back of the key fob should pop off. Now you are ready to find out how to change the Honda key battery!

How to Replace the Honda Key Battery?

Got your fob opened? Make sure your entire fob doesn’t fall apart, and don’t pull the battery out since you might pop out any essential components. Do the following steps to change the battery in your Honda key fob:

1. Place your thumb above the location of the battery.
2. With your other hand, carefully pry the dead battery out and replace it with a new one.
3. Line the back of the key fob up with the front half. Then, slowly and carefully press the pieces back together. Once secured, you will hear a snap.

How to Program the Honda Key?

Knowing how to program your Honda key can come in clutch, so let’s get into how to program your Honda key with these steps:

1. Step inside your car and close all doors. Have your key and fobs on hand.
2. Insert the key and turn to the “On” position. Next, press and hold the “LOCK” button for one second.
3. Release the button after a second and turn the key to the “Off” position. Repeat this process twice more.
4. Turn the key to the “On” position and hold the “LOCK” button on the key fob for one second. Wait for the doors to lock and unlock automatically. Once the locks have cycled, your vehicle is in remote programming mode.
5. Once again, hold the “LOCK” button for one second. Once the locks cycle, the key fob has been successfully paired with your vehicle. Repeat the process with any additional fobs that need programming.
6. Exit remote programming mode by turning the key to the “Off” position in the ignition.

Learn More About Honda Key Fobs at Honda North Near Fresno, CA

With this guide, you will always know how to open your Honda key fob to replace its battery and how to program it even when you are away from your Visalia home. Learn more about the key fob as well as other Honda service & parts tips. Contact our Honda Parts Center if you have any questions!